Water Filtration
Screen, disc, hydrocyclone and sand filters help remove unwanted particles.
Allwin Drip Fittings support clean, controlled and reliable irrigation networks. From filters and valves to joiners, takeoffs, elbows, tees and grommets, these fittings help connect, protect and maintain drip irrigation systems across farms, orchards and protected cultivation layouts.
Irrigation water can contain sand, pebbles, silt and organic matter. Correct filtration and suitable fittings help protect drip lines, reduce clogging, extend system life and improve the daily performance of the irrigation network.
Drip fittings are used for connecting laterals, controlling water flow, flushing line ends, injecting nutrients and protecting emitters from impurities.
Each fitting has a practical role in protecting system components, controlling water movement and simplifying farm-level installation.
Screen, disc, hydrocyclone and sand filters help remove unwanted particles.
Control valves, flush valves and lateral cocks help manage water direction and operation.
Joiners, tees, elbows and takeoffs make field installation faster and cleaner.
Venturi injectors and accessories support fertilizer mixing through irrigation systems.
Correct fittings help reduce clogging, wear and frequent line cleaning.
Protection and control components help extend irrigation network service life.
High-quality drip fittings and irrigation components crafted for seamless installation, dependable performance, and sustainable water management in every environment.
Used for crop row water distribution with suitable emitters and fittings.
Pre-set lateral line option for uniform drip irrigation layouts.
Used for injecting fertilizer or nutrients into irrigation lines.
Helps filter sand, silt and larger particles from irrigation water.
Disc-based filtering support for drip and micro irrigation networks.
Connects lateral pipe sections for clean line extension and repair.
Used to take branch connections from main or sub-main lines.
Changes pipe direction neatly in field layouts and corners.
Creates branch connections for multiple line directions.
Controls water flow into individual lateral sections.
Closes drip line ends and supports flushing access where required.
Helps seal takeoff and pipe connection points.
Drip fittings are selected based on water quality, field size, crop type, pressure requirement and irrigation layout.
Screen, disc, hydrocyclone and sand filters protect emitters and pipe networks.
Venturi and accessories support fertilizer injection into irrigation flow.
Joiners, takeoffs, elbows and tees help build flexible crop row layouts.
Control valves, lateral cocks and non return valves support safe operation.
Flush valves and end caps help clean lines and remove collected impurities.
Useful for drip, micro sprinkler, orchard, vegetable and protected cultivation systems.
Discover a complete range of durable drip irrigation fittings engineered for efficient water distribution, secure connectivity, and long-lasting agricultural performance.
Primary filtration component for removing sand, silt and visible particles before water reaches drip lines.
| Technical Spec |
|---|
| 10 m3 - 2 inch pipe connection |
| 20 m3 - 2.5 inch pipe connection |
| 30 m3 - 3 inch pipe connection |
Disc filtration support for drip and micro irrigation systems where fine suspended particles must be controlled.
| Technical Spec |
|---|
| 2 inch - 20 m3/hr to 30 m3 flow range |
| 2.5 inch - 30 m3/hr to 40 m3 flow range |
| 3 inch - 40 m3/hr to 50 m3 flow range |
Used where irrigation water carries heavier sand particles and pre-filtration is required.
| Technical Spec |
|---|
| 2.0 inch - 20 m3 capacity |
| 2.5 inch - 30 m3 capacity |
| 3 inch - 50 m3 capacity |
Larger filtration unit for field irrigation systems with backwash support.
| Technical Spec |
|---|
| 25 m3 - 2 inch connection |
| 30 m3 - 2.5 inch connection |
| 50 m3 - 3 inch connection |
Fertigation support component for injecting fertilizer or nutrients into irrigation water lines.
| Technical Spec |
|---|
| 1.5 inch manifold option |
| 2.0 inch manifold option |
Helps release trapped air from irrigation pipelines for smoother system operation.
| Technical Spec |
|---|
| Air Valve -1" |
Helps prevent reverse flow in irrigation lines and protects system components.
| Technical Spec |
|---|
| 2.0 inch connection |
| 2.5 inch connection |
| 3 inch connection |
Used for section control and water movement management in main and sub-main lines.
| Technical Spec |
|---|
| 2 inch option |
| 2.5 inch option |
| 3 inch option |
| 2 inch option |
| 2.5 inch option |
| 3 inch option |
Used for flushing line ends and removing collected impurities from irrigation lines.
| Technical Spec |
|---|
| 75 mm option |
| 63 mm option |
Accessory assemblies for venturi and bypass arrangements in fertigation systems.
| Technical Spec |
|---|
| 2.0 inch manifold + 2.0 x 1.5 inch bypass + 2.0 inch throttle valve |
| 2.0 inch manifold + 2.5 x 2 inch bypass + 2.5 inch throttle valve |
| 2.0 inch manifold + 3.0 x 2.5 inch bypass + 3.0 inch throttle valve |
Small field fittings for lateral connection, branching, sealing and line control.
| Product Name | Technical Spec |
|---|---|
| 16 mm Joiner Delrin | Lateral pipe joining |
| 16 mm Takeoff Delrin | Branch outlet connection |
| 16 mm Elbow Delrin | Direction change fitting |
| 16 mm Tee Delrin | Branch connection fitting |
| 16 mm Grommet Jain | Connection sealing support |
| 16 mm EPDM Grommet | Flexible sealing support |
| 16 mm Tap | Line control fitting |
| Pep Lateral Cock | Lateral line control |
| Pep Joiner | Lateral joining |
| Pep End Cap | Line end closure |
| Pep Lateral Joiner | Lateral line joining |
| Pep Takeoff | Branch outlet fitting |
Use this import as a ready Elementor section, then replace each placeholder image with the exact product photo.